We clean up after ourselves.

Pathway lights are outdoor lighting fixtures specifically designed to illuminate walkways, paths, garden borders, driveways, and other landscaping features around your home. Their primary purpose is to enhance safety by clearly marking routes and preventing trips and falls in the dark. They also significantly boost curb appeal by adding a decorative and welcoming touch to your property at night. You'll often see them lining sidewalks, driveways, outlining flowerbeds, illuminating steps, or accentuating garden structures and features like ponds or patios. Essentially, anywhere you walk outdoors at night is a great place for pathway lights!

No, LED pathway lights are actually very energy-efficient and inexpensive to operate! Compared to traditional incandescent or halogen outdoor lighting, LEDs consume dramatically less electricity – often up to 80-90% less. This means you can enjoy beautiful outdoor lighting all night long without a significant impact on your electricity bill. For example, a typical LED pathway light uses only a few watts of power. To put it in perspective, you could run several LED pathway lights for the same cost as operating a single traditional incandescent outdoor bulb. Over time, the energy savings really add up, making LED pathway lights a cost-effective and environmentally friendly choice.

Pathway lights are designed to provide gentle, ambient illumination rather than harsh, bright light. They are meant to guide your way safely and highlight landscaping without being overwhelming or causing glare. The brightness is measured in lumens (lm). Most of our modern pathway lights have lumen outputs ranging from around 100 to 400 lumens, which is perfectly adequate for pathway illumination. Think of it as a soft, welcoming glow – enough light to see the path clearly and any obstacles, but not so bright that it disrupts the nighttime ambiance or bothers your neighbors. If you're concerned about brightness, consider models with lower lumen output for subtle lighting, or those with adjustable brightness features if available.

One of the major advantages of LED pathway lights is their exceptionally long lifespan! Unlike traditional bulbs that burn out regularly, the integrated LEDs in our pathway lights are designed to last for tens of thousands of hours. Many of our models have lifespans ranging from 30,000 to 50,000 hours, or even longer. To put that into perspective, if you used your pathway lights for 8 hours every night, a 50,000-hour lifespan could last you for over 17 years! This means you won't need to worry about frequently replacing bulbs, saving you time, effort, and money on maintenance over the long run.

Yes, absolutely! LED pathway lights are designed to be left on for extended periods, including all night, every night. Because they are so energy-efficient, running them continuously won't significantly increase your energy consumption. Furthermore, leaving pathway lights on overnight enhances safety and security around your home by deterring potential intruders and ensuring well-lit walkways for anyone arriving late or leaving early. Many people choose to set their outdoor lighting on timers or use photocells (light sensors) so the lights automatically turn on at dusk and off at dawn for convenience and energy optimization.

Yes, our Modern & Contemporary Pathway Lights are specifically designed to be weatherproof and durable enough to withstand various outdoor conditions, including rain, snow, and even dust and debris. They are all rated for "wet locations" and have an IP65 rating or higher. The "IP65" rating signifies that they are protected against dust and water jets from any direction. This robust construction ensures reliable performance and longevity, even in harsh climates. You can confidently install these lights and know they are built to withstand the elements year-round.

Many of our LED pathway lights are designed for easy, low-voltage DIY installation, making them homeowner-friendly projects! Low-voltage systems are generally safer to work with than standard household voltage. Most of our kits come with simple stake mounting and plug-in connectors that you can assemble yourself.

However, some installations might be more complex, depending on your existing landscape wiring, power source, and desired setup. If you are uncomfortable working with electrical wiring, or if your project involves:

• Extending existing wiring significantly
• Installing a new transformer or power supply
• Trenching underground wires
• Connecting to hardwired systems

Then it's always best to consult with a qualified electrician for safe and proper installation. For basic stake-mounted, plug-and-play setups, most homeowners can handle the installation themselves by carefully following the included instructions.

Yes, absolutely! We understand that style is important, and we offer a variety of modern and contemporary pathway light designs to complement different architectural styles and landscape aesthetics. Our collection includes:

• Various Shapes and Profiles: From sleek and angular to curved and organic designs. We offer bollard lights, spotlight-style, low-profile, and unique sculptural forms.
• Different Finishes: You'll find finishes like classic black, modern aluminum, warm bronze, and even elegant gold accents to match your outdoor décor and home's color palette.
• Material Options: Primarily constructed from durable aluminum and die-cast aluminum for a premium look and long-lasting performance.

We encourage you to browse our collection page and individual product listings to explore the diverse styles, shapes, and finishes available to find the perfect pathway lights that enhance your home's unique look and personal taste.

Yes, we absolutely provide customer support! We are committed to ensuring you have a positive experience with our products, from purchase to long-term use. If you have any questions before, during, or after your purchase, our customer support team is here to help.

Yes, LDC and IES files are available for our key path light models. These files contain detailed photometric data necessary for accurate lighting simulations. You can download these directly from the product pages on leonlite.com within the "Downloads" or "Technical Specs" section. These files allow you to:

• Visualize light distribution patterns (Isocandela curves) for spacing calculations.
• Predict illuminance levels (footcandles or lux) at various distances and angles.
• Ensure uniformity ratios meet design requirements for safety and aesthetics.
• Optimize fixture placement for desired light effects and minimize light trespass.

Using these files in lighting design software enables precise layouts and ensures compliance with recommended illuminance levels for pathways and driveways as outlined in IESNA standards.

Our Modern & Contemporary Pathway Lights utilize integrated, high-efficiency LED drivers. The driver type varies slightly depending on the model for optimized performance, but generally, we employ:

• Constant Current (CC) Drivers: Predominantly used for models like the Angolo Retto and Stella Bitta. CC drivers ensure consistent current supply to the LEDs, regardless of minor voltage fluctuations, leading to stable light output and extended LED lifespan.
• Constant Voltage (CV) Drivers: Utilized in some models like the XGEN™ Dual-spot where flexibility with voltage input is beneficial, and internal regulation manages current to the LEDs effectively.

Surge Protection: All integrated drivers include built-in surge protection to withstand transient voltage surges common in outdoor environments. The standard surge protection level is 2kV, with enhanced protection options (up to 4kV) available on request for specific project requirements in areas prone to severe weather or unstable power grids. Refer to individual product specifications for exact driver type and surge protection ratings.

Effective thermal management is crucial for maintaining LED performance and longevity. LEONLITE pathway lights are engineered with several key thermal management features:

• Aluminum Housings: Fixtures are primarily constructed from aluminum and die-cast aluminum, materials known for excellent thermal conductivity. These housings act as heat sinks, efficiently dissipating heat away from the LED chips and drivers.
• Integrated Heat Sinks: Internal heat sink structures are designed into the fixture body to maximize surface area for heat dissipation. These are often directly bonded to the LED PCB (Printed Circuit Board) for optimal thermal transfer.
• Driver Placement: LED drivers are strategically positioned within the fixture to minimize heat build-up near the LEDs. In some designs, drivers are thermally isolated or placed in cooler zones of the fixture.
• Ventilation (where applicable): While maintaining IP65 ratings, some designs incorporate subtle ventilation features to encourage airflow and further reduce operating temperatures, particularly important in hotter climates.
• LED Selection: We utilize high-quality LEDs from reputable manufacturers known for their thermal stability and efficiency, which intrinsically generate less heat than lower-grade LEDs.

These combined strategies ensure that LEDs operate within their optimal temperature range, even in extreme ambient temperatures ranging from -4°F to 104°F (-20°C to 40°C), contributing significantly to the stated 30,000 to 50,000-hour lifespans.

We offer a range of mounting solutions to accommodate various landscape conditions:

• Standard Ground Stake: Included with most pathway lights, these durable plastic stakes are suitable for typical soft soil or garden beds. Installation is simple – insert the stake directly into the ground.
• Heavy-Duty Metal Stakes (Optional): For enhanced stability in looser soils or areas prone to disturbance, optional heavy-duty metal stakes are available. These offer increased rigidity and deeper ground penetration.
• Surface Mounting Base: For installation on paved surfaces, decks, or concrete, a surface mounting base accessory is available for select models (e.g., Mini Bollard Light, Angolo Retto). This base allows for secure bolting directly to hard surfaces.
• Junction Box Mount Adapters: For projects requiring direct wiring into underground junction boxes, we offer adapters that facilitate seamless integration and weatherproof connections.
• Tree/Post Mounting Straps: For unique design applications, adjustable straps are available for mounting certain compact pathway lights (like the Stella Bitta) onto trees or posts (with diameter limitations).

Note: Always ensure proper ground preparation and use appropriate mounting hardware to guarantee stability and prevent fixture movement, especially in areas with high winds or foot traffic. Consult individual product accessory pages for specific compatibility and details.

Color consistency is paramount for professional landscape lighting installations, especially when using multiple fixtures in proximity. We implement rigorous LED binning and quality control processes to ensure uniformity:

• ANSI C78.377 Binning: LEDs are sourced and binned according to ANSI C78.377 standards for color temperature (CCT) and chromaticity. This ensures that LEDs within the same order and across different production batches maintain tight color tolerances.
• MacAdam Ellipse Guarantee: We guarantee a color consistency within 5-step MacAdam Ellipse (SDCM) for our standard pathway light models. This means the color difference between fixtures will be visually imperceptible in most applications. For projects requiring even tighter tolerances (e.g., high-end residential or architectural lighting), 3-step MacAdam Ellipse LEDs are available on request for certain models, subject to lead time and minimum order quantities.

Yes, safety and compliance are paramount. All LEONLITE Modern & Contemporary Pathway Lights are rigorously tested and certified to meet or exceed relevant US safety standards for outdoor luminaires. Specifically, they are UL Listed under UL 1598 (Standard for Luminaires) and UL 8750 (Standard for LED Equipment for Use in Lighting Products). Many models also carry ETL Listing which is an alternative Nationally Recognized Testing Laboratory (NRTL) certification accepted by most jurisdictions.

Implications for Electrical Inspections: Having UL or ETL Listing is crucial for passing electrical inspections in most US jurisdictions. Inspectors will typically look for the NRTL mark on the product label and in documentation to verify that the lighting products have been independently tested and certified for safety. Using listed products streamlines the inspection process and demonstrates compliance with electrical codes, ensuring project approval and homeowner safety. Product listings and certifications are clearly indicated on each product page and in technical datasheets.

The XGEN™ Dual-spot and similar models offer advanced lighting control for dynamic and customized outdoor environments.

• Adjustable CCT: The CCT is adjustable typically across a range (e.g., 2700K - 5000K) allowing users to tune the white light from warm white to daylight to suit time of day, season, or desired ambiance. Control is generally via:

On-Fixture Switch (Selectable CCT Models): Some models have a physical switch for pre-set CCT options.

APP Control: Use Litedge APP allow for step-less CCT adjustment and dimming.

Smart Control Systems (Basic Integration): While not directly DMX compatible, some smart home lighting hubs may offer basic on/off/dimming control if compatible with the power supply output and voltage range.

• RGB Control: RGB models offer full-color spectrum control, allowing for millions of color possibilities and dynamic lighting scenes. Control typically involves:

Dedicated IR or RF Remote: Included remotes offer pre-programmed color scenes, color selection wheels, and dimming for RGB functionality.

Basic Smart Home Integration (Limited): Again, depending on the smart home hub, basic on/off/color scene control might be achievable if the power supply and voltage are compatible, though full DMX level control is not standard.

Control Protocols: Currently, our pathway lights with advanced control features primarily utilize proprietary RF remote control protocols for ease of use and dedicated functionality. Direct DMX, Bluetooth, or Wi-Fi control is not natively integrated within the pathway lights themselves to maintain simplicity and cost-effectiveness in outdoor landscape applications. For projects requiring full DMX or advanced smart home integration, consider our professional-grade architectural lighting lines, or explore compatible third-party low voltage DMX controllers that can interface with our standard pathway lights via on/off control.

Color Rendering Performance of XGEN™ Adjustable CCT Series:

• CRI Range: The XGEN™ series is designed to maintain a consistently high CRI throughout its tunable color temperature range (3000K to 5000K).

Typical CRI: CRI > 90 across the entire CCT range. This ensures excellent color accuracy and natural rendering of illuminated objects, crucial for highlighting landscape features and architectural details.

• CRI Variation: While there might be minor variations, the CRI is engineered to remain above 90 and does not exhibit a significant drop as the CCT is adjusted from warm white (3000K) to cool white (5000K). The LED chips used are selected for consistent color performance across their tuning range.
• R9 Value (Red Rendition): We can provide specific R9 values upon request, which indicate the rendering of saturated red colors. High R9 values are important for accurately rendering reds and vibrant colors in landscapes. XGEN™ series aims for R9 values above 50, ensuring good red rendition.

LEONLITE Modern & Contemporary Pathway Lights are backed by a robust 1-3 Year Limited Warranty. This warranty covers:

• LED Module Failure: Premature failure of the integrated LED module due to defects in materials or workmanship, resulting in complete light failure or significant reduction in light output beyond normal lumen depreciation over time.
• Driver Failure: Malfunction or failure of the integrated LED driver, preventing the light from operating correctly.
• Fixture Housing Defects: Defects in the fixture housing material or manufacturing that lead to structural failure, corrosion beyond normal weathering, or water ingress (assuming proper installation and IP rating integrity).

Warranty Exclusions: The warranty typically does not cover:

• Damage due to improper installation, misuse, negligence, or unauthorized modifications.
• Damage from acts of nature (e.g., lightning strikes, floods).
• Normal wear and tear, including minor cosmetic changes or expected lumen depreciation over the product lifespan.
• Labor costs associated with removal or re-installation of fixtures.

To initiate a warranty claim, please contact our customer service department with your original purchase information, product model, and a detailed description of the issue. We will work to resolve valid warranty claims promptly through repair, replacement, or credit, at our discretion.